AEDOFAB » Products http://www.aedofab.com Off-Road Fabrications / 815-729-4030 Sat, 08 Dec 2012 05:40:37 +0000 en-US hourly 1 http://wordpress.org/?v=3.5 Discovery Series I Sway Bar Quick Disconnect http://www.aedofab.com/archives/655 http://www.aedofab.com/archives/655#comments Sat, 08 Dec 2012 05:40:37 +0000 admin http://www.aedofab.com/?p=655 Sway Bar Quick Disconnect Kits for Discovery Series 1

AedoFab quick disconnect kits allow you to retain the on-road handling characteristics of your Discovery while still having a quick method to disconnect your sway bars for maximum articulation on the …

]]> http://www.aedofab.com/archives/655/feed 0 Tom Wood’s Drive Shafts http://www.aedofab.com/archives/221 http://www.aedofab.com/archives/221#comments Mon, 22 Feb 2010 23:03:00 +0000 admin http://www.aedofab.com/archives/221

Aedofab is an official distributor of Tom Woods custom driveshafts. Contact us to help you work through making measurements, or for advice on purchasing a ready-made replacement or upgraded shaft.

The folks at Aedofab and our customers have been using …

Continue reading →]]> http://www.aedofab.com/archives/221/feed 0 Drive Shafts for Land Rover Discovery Series I and Series II http://www.aedofab.com/archives/218 http://www.aedofab.com/archives/218#comments Mon, 22 Feb 2010 23:02:57 +0000 admin http://www.aedofab.com/archives/218 Custom Drive Shafts for Land Rover Discovery Series I

We distribute Tom Woods drive shafts. Rather than measuring yourself, simply order a ready-made Double Cardon or Multiple Double Cardon shaft. The Double Cardon Shaft is recommended for replacement of the …

Continue reading →]]> http://www.aedofab.com/archives/218/feed 0 Dual Battery Tray for Land Rover Discovery Series II http://www.aedofab.com/archives/215 http://www.aedofab.com/archives/215#comments Tue, 23 Feb 2010 05:02:09 +0000 admin http://www.aedofab.com/archives/215 Dual-Battery Tray for Land Rover Discovery Series II

The dual battery tray is made using 1/8″ steel plate for the tray and aluminum for the battery securing bracket.  It mounts to the stock location of the plastic tray.  

Battery Tray: …

Continue reading →]]> http://www.aedofab.com/archives/215/feed 0 Front Bumper for Land Rover Discovery Series I and Series II http://www.aedofab.com/archives/216 http://www.aedofab.com/archives/216#comments Tue, 23 Feb 2010 05:02:09 +0000 admin http://www.aedofab.com/archives/216 Front Bumper for Land Rover Discovery Series I and Series II

Both bumpers are made using a combination of 1/4″ and 3/16″ steel plate. No modifications to the vehicle is required. For the Disco 1 you can optionally cut your …

Continue reading →]]> http://www.aedofab.com/archives/216/feed 0 Jeep TJ Front Bumpers http://www.aedofab.com/archives/213 http://www.aedofab.com/archives/213#comments Tue, 23 Feb 2010 05:02:08 +0000 admin http://www.aedofab.com/archives/213 Front Bumper for Jeep Wrangler TJ

The Wrangler TJ bumper comes as shown below with a winch mount plate, brushguard, and light tabs. The stock tow hooks fit, or we can provide you with some if needed. The bumper is …

Continue reading →]]> http://www.aedofab.com/archives/213/feed 0 Jeep Cherokee and Grand Cherokee Front Bumpers http://www.aedofab.com/archives/211 http://www.aedofab.com/archives/211#comments Mon, 07 Feb 2005 06:11:08 +0000 admin http://www.aedofab.com/archives/211 Front Bumper for Jeep Cherokee Classic and Jeep Grand Cherokee

The bumper is made using a combination of 1/4″ and 3/16″ steel plate. It is ready for use with a winch and has optional features so you can customize your …

Continue reading →]]> http://www.aedofab.com/archives/211/feed 0 Front Bumper for Dodge Dakota http://www.aedofab.com/archives/209 http://www.aedofab.com/archives/209#comments Mon, 07 Feb 2005 06:11:03 +0000 admin http://www.aedofab.com/archives/209 Front Bumper for Dodge Dakota

The bumper is made using a combination of 1/4″ and 3/16″ steel plate. It is ready for use with a winch and has optional features so you can customize your bumper to your needs. All …

Continue reading →]]> http://www.aedofab.com/archives/209/feed 0 Chevy S-10, Blazer, and GMC Sonoma Front Bumpers http://www.aedofab.com/archives/204 http://www.aedofab.com/archives/204#comments Mon, 07 Feb 2005 06:11:02 +0000 admin http://www.aedofab.com/archives/204 Front Bumper for Chevy S-10 and Blazer with the ZR2 Package and GMC Sonoma Highrider

The bumper is made using a combination of 1/4″ and 3/16″ steel plate. It is ready for use with a winch and has optional features …

Continue reading →]]> http://www.aedofab.com/archives/204/feed 0 Rear Bumper for Chevy S-10 and Blazer with the ZR2 Package and GMC Sonoma Highrider http://www.aedofab.com/archives/205 http://www.aedofab.com/archives/205#comments Mon, 07 Feb 2005 06:11:02 +0000 admin http://www.aedofab.com/archives/205 Rear Bumper for Chevy S-10 and Blazer with the ZR2 Package and GMC Sonoma Highrider

The bumper is made using a combination of 1/4″ and 3/16″ steel plate. It comes with an integrated trailier hitch and slots for use with …

Continue reading →]]> http://www.aedofab.com/archives/205/feed 0